11 June 2017

Bikewright Workshop Project- Diamondback Apex- Rawland Raidoverks Rando Rack


Rawland Raidoverks Rando Rack with p clamps.


The reason I picked the Diamondback Apex frame for this project was it was originally built for adventure. Mountain bikes in the early days came with rack mounts and they were make for off-road camping and touring trips. Todays bikepacking or off-road touring is a refinement of what started over 30 years ago. The Apex came with rack mounts for low rider panniers (see picture above). I had been on a quest to find a black porteur rack that I could use with a low rider rack mount. Now there is a difference between a low rider mount and a mid-fork mount. A mid- fork mount is the same type of mounting point used for a rear rack on the seat stay, but a mid-fork mount is at the front of the fork just up a little higher than the low rider mounting point.

Rawland Cycles just came out with their Rawland Raidoverks Rando Rack. It looked as if this was what I was looking for. For the most part it is. It came with two pair of struts. One set of straight and one set of off-set struts. The straight struts are 219mm and the off set are 205mm. You could also use P-clamps (something I did not want to use) if you do not have fork mounts.

In the pictures above and below you can see that I had to use P-clamps. This set-up works its just not the look I am looking for. The Rawland Cycles Raidoverks Rando Rack is a nice rack and has three mounting locations for light and also fender mounts. The rack also mounts at the top of the fork, so I had to change my straddle cable to an old school cable mount to be able to get the straddle cable over the fork mount. I just used a brake cable for a straddle cable which seems to workout well.  



Test Ride


Not being happy with the P-clamps I went to my local LBS to see if the could order some longer struts for me. Just so happen the shop rat had a set on-hand. Pictured below are the off-set struts I purchased for $10. I believe straight struts would have also worked just as well.
Off set strut that I used to replace the Rawland support

Pictured below I have replaced the Raidoverks strut with the one I purchased from my LBS. Since I am not an engineer I have no idea if this changes the strength of the original design. I the Raidoverks is a rock solid design. Since this rack was designed for both straight-blade and traditional raked forks, the only improvement I could see is making the point where the strut attaches at the top of the rack more adjustable.
Replaced the Rawland Raidoverks  struts

Couple more test rides are in order!

No comments: